|
Application method:
These products are applied with a brush, a roller or a spray gun under normal temperature conditions (10°C to 28°C). They must be applied onto bare substrates, which requires the preliminary baring of the panels for renovation sites.
To obtain a consumption calculation adapted to your needs, we suggest that you contact our technical department for a recommendation request.
The quantities to be applied are identical regardless of the substrate to obtain the same classification:
 |
| Density≥700kg/m³ |
A1 substrate
|
A2, s1-d0 substrate |
| Concrete, cement, asbestos cement etc. |
Cardboard-covered plasterboard at least 13 mm thick.
|
|
Fire classification
|
B,s2-d0 or M1 |
| |
| ANCORFLAMME |
600 g/mē i.e. 8.8 mē/L in 1 or 2 layers depending on the application equipment |
| |
| FINIBAT |
100 g/mē i.e. 11 mē/L in 1 layer |
| |
| |
The aspect and application performance of these paints differ from traditional products. They must not be applied onto substrates exposed to abrasion and in places where the temperature can drop below 5°C.
The FINIBAT paint finish can be tinted and we provide most shades of the RAL colour chart upon request (please contact us: contact@solution-intumescent.fr).
Technical characteristics:
|
| |
ANCORFLAMME |
FINIBAT |
|
| |
| Afnor NFT 36005 classification |
Category 1 - Class 7a22 |
Category 1 - Class 7a2 |
| |
|
Finish
|
Matt |
Satin |
| |
|
Colour
|
White |
White + RAL shades/td>
|
| |
|
Binder
|
Halogenated vinyl copolymers |
Vinyl and acrylic
copolymers |
| |
|
Thinner
|
Water |
Water |
| |
|
Drying
Dry to touch
Dry to recoat
|
1 hour
6 hours |
1 hour
Do not recoat |
| |
|
Packaging
|
3L - 15L |
¾L - 3L |
Products compliant with European directive 2004-42 on VOCs |
|
