The A650P/A651P varnish system is designed for interior wood protection (dry room): solid wood (all species), plywood, OSB or MDF. Reaction to fire classification: M1 or M2 (test reports no. 14077-08/1 and 13898-08/1 issued by the SNPE) depending on the substrate, the number of sides coated and the thickness of the panels.

 Technical data sheet
  Certification reports
  GTFI application guidelines
 Material safety data sheets (Quick-fds website)

Application method:

These products are preferably applied with a brush or roller but spray gun application can be envisaged (please contact us). They must be applied onto bare wood, which requires the preliminary baring of the substrates for renovation sites.
Application quantities vary depending on the type of treatment envisaged:

	Solid woodwoodstained or otherwise 10 mm	Solid woodwoodstained or otherwise 10 mm	Plywood 8 mm	MDF 10 mm	OSB 10 mm
	2 Sides	1 Side	1 Side	1 Side	1 Side
Classification as per report	M1 SNPE 14077-08/1		M2 SNPE 13898-08/1
A650 P	400 g/m²/side Soit 2,8 m²/L	700 g/m², i.e. 1,6 m²/L	700 g/m², i.e. 1,6 m²/L
A651P	57 g/m², i.e. 19 m²/L
*with a minimum build impregnation woodstain such as ULIREX IMPREGNATION

The aspect and application performance of these varnishes differ from traditional varnishes. They must not be applied onto substrates exposed to abrasion, in places where the temperature can drop below 5°C and in humid rooms or rooms prone to condensation.

Technical characteristics:

	A 650 P	A 651 P
Afnor NFT 36005 classification	Category 1 - Class 7a1	Category 1 - Class 7a1
Finish	Matt	Satin
Colour	Translucent amber	Colourless
Binder	Halogenated vinyl copolymers	Halogenated vinyl copolymers
Thinner	Synthetic solvent (Xylene)	Water
Packaging	3L - 15 L	3L - 15 L
Products compliant with European directive 2004-42 on VOCs